Indian Coast Guard Syllabus 2022 for Navik GD, DB, Yantrik Electrical, Electronics, Mechanical

Indian Coast Guard Syllabus 2022: इंडियन कोस्ट गार्ड, यह भारत सरकार का एक सशस्त्र बल है। भारतीय तटरक्षक बल (ICG) ने विभिन्न पदों के लिए अभ्यार्थियों से आवेदन मांगे हैं| जो भी इच्छुक अभ्यर्थी इंडियान कोस्ट कार्ड में नाविक/यांत्रिक भर्ती के लिए आवेदन करना चाहता है वह अधिकारिक वेब साइट पर जाकर कर सकता है| आइए नीचे Indian Coast Guard Recruitment 2022 Syllabus और अन्य महत्वपूर्ण जानकारी के बारे में जानते हैं|

Indian Coast Guard Recruitment 2022 | Syllabus | Application Form and other Detail

Indian Coast Guard द्वारा Navik GD और Yantrik के 350 पदों पर भर्ती हेतु आवेदन प्रक्रिया शुरू करने जा रही है| इच्छुक अभ्यर्थी 02 जुलाई 2021 से आधिकारिक वेबसाईट पर जाकर आसानी से ऑनलाइन आवेदन कर सकते हैं| जनरल एवं ओबीसी के लिए आवेदन शुल्क 250 रुपए और एससी/एसटी वर्ग के अभ्यर्थी बिना किसी शुल्क के आवेदन कर सकते हैं| आवेदन की अंतिम तिथि 16 जुलाई 2021 है| Indian Coast Guard Recruitment Notification के अनुसार Navik (GD) 260, Navik (DB) 50, और Yantrik (Electrical, Electronics, Mechanical) के लिए रिक्त पदों की संख्या 40 है| इन पदों के लिए आयु सीमा भी निर्धारित की गई है| 18 से 22 वर्ष की आयु के अभ्यर्थी आवेदन कर सकते हैं। वहीँ आरक्षित वर्ग छूट भी दी गई है|

आवेदन करने हेतु शैक्षिक योग्यता

• Navik (GD) के लिए किसी मान्यता प्राप्त बोर्ड से 12वीं (PCM) पास छात्र आवेदन करने के योग्य हैं|
• Navik (DB) के लिए किसी भी मान्यता प्राप्त बोर्ड 10वीं पास छात्र आवेदन कर सकते हैं|
• Yantrik के लिए Electrical/Electronics/Mechanical या telecommunication में 3-4 वर्षीय डिप्लोमा होना अनिवार्य होगा| यह डिप्लोमा तकनीकी एजुकेशन (AICTE) से मान्यता प्राप्त होना चाहिए।
• Indian Coast Guard Syllabus 2021 for Navik DB (Section I)

Note: Section I- Syllabus is also part of Navik (GD), Yantrik Electrical, Electronics, and Mechanical.

Mathematics

Mathematical Simplification, Ratio and Proportion, Algebraic Identities, Linear Equations and Polynomials, Simultaneous Equations, Basic Trigonometry, Simple Mensuration, Geometry, Measures of Central Tendency (Average, Median and Mode), Interest, Profit, Loss and Percentage, Work, Time, Speed and Distance.

Science

Nature of Matter, Universe (Planets / Earth/Satellites/Sun), Electricity and its application, Force and Gravitation, Newton’s Laws Of Motion, Work, Energy and Power, Heat, Temperature, Metals and Non-Metals, Carbon and its Compounds, Measurements in Science, Sound and Wave Motion, Atomic Structure.

English

Passage, Preposition, Correction of sentences, Change active to passive/passive to active voice, Change direct to indirect/indirect to direct, Verbs, Tense, Punctuation, Substituting phrasal verbs for expression, Synonyms and Antonyms, Meanings of difficult words, Use of adjectives, Compound preposition, Use of pronouns.

General Awareness

Geography: Soil, Rivers, Mountains, Ports, Inland, Harbours, Culture and Religion, Freedom Movement, Important National Facts about India, Heritage, Arts and Dance, History, Defence, Wars and Neighbours, Awards and Authors, Discoveries, Diseases and Nutrition, Current Affairs, Languages, Capitals and Currencies, Common Names, Full Forms and Abbreviations, Sports: Championships / Winners /Terms / Number of Players, Eminent Personalities, National Bird/Animal/Sport/Flower/Anthem/ Song/ Flag/Mountains.

Reasoning

Spatial, Numerical Reasoning and Associative Ability, Sequences, Spellings Unscrambling, Coding and Decoding.

Indian Coast Guard Syllabus 2022 For Navik GD Post

Physics

Physical world and measurement, Kinematics, Laws of Motion, Work, Energy and Power. Newtons laws and applications, circular motion, Motion of System of particles and rigid body, gravitation, Property of Bulk Matter, thermodynamics, behaviour of perfect gas and kinetic theory, Oscillation and Waves, Electrostatics, Current Electricity, Magnetic Effects of current and magnetism, Electromagnetic Induction and alternating currents, Electromagnetic Waves, Optics, Dual Nature of Matter and radiation, Atom and Nuclei, Electronic devices, Communicating systems.

Mathematics

Sets, Relations and Functions –
Set, Relations and Functions trigonometric functions.
Algebra – Principle of Mathematical induction, complex numbers and quadratic equations, linear inequalities, permutation and combinations, binomial theory, sequence and series, Matrices, determinants.
Vector And Three Dimensional
Geometry – Vectors, and three-dimensional geometry
Liner Programming.

Coordinate Geometry – Straight lines, conic section, introduction to three-dimensional geometry.
Calculus – Limits and derivatives, Continuity and differentiability, Applications and derivatives, Integrals, applications of the integrals, differential equations.

Mathematical Reasoning
Probability – Statistics, Probability. Mathematical Simplification, Ratio and Proportion, Algebraic Identities, Linear Equations and Polynomials, Simultaneous Equations, Basic Trigonometry.

Relations And Functions – Relations and Functions, inverse trigonometric functions. Simple Mensuration, Geometry, Measures of Central Tendency (Average, Median and Mode.

Indian Coast Guard Syllabus 2021 for Yantrik Electrical

Basic concepts- Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units

Circuit law- Kirchhoff‘s law, Simple Circuit solution using network theorems.

Magnetic Circuit- Concepts of flux, EMF, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction.

AC Fundamentals- Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal waveform, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.

Measurement and measuring instruments- Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection.

Electrical Machines- (a) D.C. Machine (b) 1 phase and 3 phase transformers (c) 3 phase induction motors

Synchronous Machines- Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.

Generation, Transmission and Distribution- Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears and Protection.

Estimation And Costing- Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules.

Utilization of Electrical Energy- Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors. Basic Electronics.

Indian Coast Guard Syllabus 2022 for Yantrik Electronics

Basic concepts – Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units.

Electronic Components & Materials – Conductors, Semi conductor& Insulators; Magnetic materials; Jointing & Cleaning materials for U/G copper cable & OFC; Cells and Batteries (chargeable and non-chargeable); Relays, Switches, MCB & Connectors.

Electronic Devices and Circuits – PN Junction diodes, thyristor; Diode and triode circuits; Junction Transistors; Amplifiers; Oscillator; Multivibrator, counters; Rectifiers; Inverter and UPS.

Digital Electronics – Number System & Binary codes; Boolean Algebra & Logic gates; Combinational & Sequential logic circuits; A/D & D/A converter, counters; Memories.

Linear Integrated Circuit – Introduction to operational Amplifier; Linear applications; Non-Linear applications; Voltage regulators; Timers; Phase lock loop.

Microprocessor and Microcontroller – Introduction to microprocessor, 8085 microprocessor working; Assembly Language programming; Peripherals & other microprocessors; Microcontrollers.

Electronic Measurements – Measuring systems; Basic principles of measurement; Range Extension methods; Cathode ray oscilloscope, LCD, LED panel; Transducers

Communication Engineering – Introduction to communication; Modulation techniques; Multiplexing Techniques; Wave Propagation, Transmission line characteristics, OFC; Fundamentals of Public Address systems, Electronic exchange, Radar, Cellular and Satellite Communication.

Data communication and Network – Introduction to data communication; Hardware and interface; Introduction to Networks and Networking devices; Local Area Network and Wide area network; Internet working.

Computer Programming – Programming concepts; Fundamentals of ‘C’ and C ++; Operators in ‘C’ and C ++; Control Statements; Functions, Array String & Pointers, File Structure; Data Structure and DBMS.

Basic Electrical Engineering – DC Circuits; AC fundamentals; Magnetic, Thermal and Chemical effects of Electric current; Earthing – Installation, Maintenance, Testing.

Indian Coast Guard Syllabus 2022 for Yantrik Electrical

Engineering Mechanics- Resolution of forces, Equilibrium and Equilibrant, parallelogram law of forces, triangle law of forces, polygon law of forces and Lami’s theorem, couple and moment of a couple, calculation of moment of inertia and radius of gyration of : (a) I-Section (b) channel section (c) T-Section (d) L-Section (Equal & unequal lengths) (e) Z-Section (f) Built-up sections (simple cases only)

Material Science- Mechanical properties of engineering materials – tensile strength, compressive strength, ductility, malleability, hardness, toughness, brittleness, impact strength, fatigue, creep resistance. Classification of steels, mild steel and alloy steels. Importance of heat treatment. Heat treatment processes – annealing, normalizing, hardening, tempering, carburizing, nitriding and cyaniding.

Strength of Materials- Stress, strain, stress-strain diagram, factor of safety, thermal stresses, strain energy, proof resilience and modulus of resilience. Shear force and bending moment diagram – cantilever beam, simply supported beam, continuous beam, fixed beam. Torsion in shafts and springs, thin cylinder shells.

Machining- Working principle of lathe. Types of lathes – Engine lathe – construction details and specifications. Nomenclature of single point cutting tool, geometry, tool signature, functions of tool angles. General and special operations – (Turning, facing, taper turning thread cutting, knurling, forming, drilling, boring, reaming, keyway cutting), cutting fluids, coolants and lubricants. Introduction to shaper, slotter, plainer, broaching, milling and manufacture of gears,

Welding – Introduction, classification of welding processes, advantages and limitations of welding, principles of arc welding, arc welding equipment, choice of electrodes for different metals, principle of gas (oxy-acetylene) welding, equipment of gas welding, welding procedures (arc & gas), soldering and brazing techniques, types and applications of solders and fluxes, various flame cutting processes, advantages and limitations of flame cutting

Grinding & Finishing Process- Principles of metal removal by grinding, abrasives, natural and artificial, bonds and binding processes, vitrified, silicate, shellac rubber, grinding machines, classification: cylindrical, surface, tool & cutter grinding machine, construction details, relative merits, principles of centreless grinding, advantages & limitations of centreless grinding work, holding devices, wheel maintenance, balancing of wheels, coolants used, finishing by grinding, honing, lapping, superfinishing

Metrology- Linear measurement – Slip gauges and dial indicators, angle measurements, bevel protractor, sine bar, angle slip gauges, comparators (a) mechanical (b) electrical (c) optical (d) pneumatic. Measurement of surface roughness; methods of measurements, by comparison, tracer instruments and by interferometry, collimators, measuring microscope

Fluid Mechanics & Hydraulic Machinery- Properties of fluid, density, specific weight, specific gravity, viscosity, surface tension, compressibility capillarity, Pascal’s law, measurement of pressures, the concept of buoyancy. Concept of Reynold’s number, pressure, potential and kinetic energy of liquids, total energy, laws of conservation, mass, energy and momentum, the velocity of liquids and discharge

Industrial Management- Job analysis, motivation, different theories, satisfaction, performance reward systems, production, planning and control, relation with other departments, routing, scheduling, dispatching, PERT and CPM, simple problems. Materials in industry, inventory control model, ABC Analysis

Thermal Engineering- Laws of thermodynamics, conversion of heat into work vice versa, laws of perfect gases, thermodynamic processes – isochoric, isobaric, isothermal hyperbolic, isentropic, polytrophic and throttling, modes of heat transfer, thermal conductivity, convective heat transfer coefficient, Stefan Boltzman law by radiation and overall heat transfer coefficient.